APS Telco And Network IT Solutions Private Limited

Fiber Patch Cables Datasheet MAKE HIGH-SPEED ETHERNET NETWORK EQUIPMENT CONNECTIONS Features Designed for data center, enterprise, FTTx, LAN and WAN, CATV network, telecom network applications , etc. requiring quick infrastructure deployment such as main, horizontal, and zone distribution areas.

Standard Fiber Patch Cables

Fiber optic patch cables are ideal for supporting high speed telecommunication network fiber applications. They are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types are available to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fiber Channel. Every termination is through rigorous parameter test to ensure the highest network performance.

Features
» High quality zirconia ferrules. » Good repeatability and interchangea bility. » LC, SC, ST, FC, LSH, MTRJ, MU connectors are available. » Flame-retardant, rugged and durablejacket. » Printing helps clarify and recognize different cables. » OS2, OM4, OM3, OM2, OM1, OM5 are available. » Factory terminated and tested for insertion loss, return loss and end face

R&M Patch cord LCPC- LCPC

Patch-cord MM OM3 DX LCPC-LCPC Scope of supply:

•Patch-Cord

• Test report printed on P/N Label

Molex’s Optical Fiber Patch Cords are LS0H jacketed as standard. PVC and Plenum rated cables are available on request. Molex patch cords offer factory–controlled performance in a variety of connector, ISO performance standards and lengths.

Multi Mode OM4 Patch Cords are typically used in High Density Networks. We ahev complete range of Multi Mode Patch Cords including OM3, OM4, OM2 and OM1.

NPC6ASZDB-GY001M NETCONNECT® Cat 6A S/FTP RJ45 Patch Cord, LSZHHigh-performance patch cords exceeding industry standards supporting NETCONNECT channel specifications Standardized transparent, slim-line boots provides consistent patch cord appearance and supports highest density applications Colored clips are available to fit the transparent boot, eliminating the need of multiple colors for matching every jacket color Colored pull latch tabs are available for easier plug release handling from the modular jack

Features of R&MthinLine Cat.6 Patch Cord

– Fulfills the performance requirements of Category 6, Class E (250MHz) according to the present standard of the ISO/IEC 11801 – Connectivity complies with the Category 6 specifications of the IEC 60603-7-4 / IEC 60603-7-5 components standard with the Cat.6 connection module – Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002 – The flexible cable meets the extended TCL specification of level 2 according to IEC 61156-6 for frequencies above 100 MHz – IDC wire termination according to IEC 60352-3 – Tested according to IEC 61935-2 – Strain relief according to TIA/EIA 568.2-D – Each individual patch cord is tested – Can also be used as Cat.5e (backwards compatible) – Slim plug dimensions: 41.1 x 11.7 x 6.6mm (length x width x depth) – Ultra stable strain relief – Lengths from 0.2 to 20m available – Impedance of 100Ω – LSZH jacket – R&M security sytem and colour coding – R&M environment system

R&MthinLine Cat.6 high end patch cords are used for connecting network equipment where size matters and a high density is needed, for example in data centres. It allows almost for a doubling of the cable amount in a given cable management system. Using the patented R&M RJ45 plug with its unique IDC technology they are suitable for power delivery (PoE) up to the highest levels. They are suitable for frequencies of up to 250 MHz.


Features of R&MthinLine Cat.6 Patch Cord

– Fulfills the performance requirements of Category 6, Class E (250MHz) according to the present standard of the ISO/IEC 11801
– Connectivity complies with the Category 6 specifications of the IEC 60603-7-4 / IEC 60603-7-5 components standard with the Cat.6 connection module

– Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002

– The flexible cable meets the extended TCL specification of level 2 according to IEC 61156-6 for frequencies above 100 MHz

– IDC wire termination according to IEC 60352-3

– Tested according to IEC 61935-2

– Strain relief according to TIA/EIA 568.2-D

– Each individual patch cord is tested

– Can also be used as Cat.5e (backwards compatible)

– Slim plug dimensions: 41.1 x 11.7 x 6.6mm (length x width x depth)

– Ultra stable strain relief

– Lengths from 0.2 to 20m available

– Impedance of 100Ω

– LSZH jacket

– R&M security sytem and colour coding

– R&M environment system

PCD-02001-0H-I


PowerCat 6 U/UTP Patch Cord


Molex PowerCat 6 U/UTP Patch Cords are key componentsof PowerCat 6 U/UTP End-to-End Solution and are designedto support data networks for 10/100BASE-T and 1000BASE-Tapplications.

The patch cable is made from high quality four pair 24 AWG strandedcopper wire. Available in a range of colors and lengths, PowerCat 6patch cords are pre-terminated with RJ45 plugs and feature anti-snagslim strain relief slip on boots.

PowerCat 6 U/UTP PVC Patch Cord

Molex PowerCat 6 U/UTP Patch Cords are key components of PowerCat 6 U/UTP End-to-End Solution and are designed to support data networks for10/100BASE-T and 1000BASE-T applications.


The patch cable is made from high quality four pair 24 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

NCB-C6UGRYR1-1

Cat6 UTP Patch Cord

D-Link solid cables are the best twisted-pair cables in the market for transmitting dataover local area Networks (LANs). These cables exceed performance requirementsspecified by the TIA/EIA-568B.2 / TIA/EIA-568C.2 and IEC 60603-7-4 standards.

As streaming video and multimedia over LAN are gaining popularity, users demand faster datatransmission and reduced waiting time. D-Link cables are ideal for simple, cost-effective andhigh-speed transmission performance. They support a higher signal-to-noise ratio, providingbetter reliability for current applications and higher data rates for future applications

R&M Patch cord CU CL C6 U GY 2 M